Creating a Sleek Design | James Street Project

James Street, Fortitude Valley has seen a lot of change over the past few years, with many new buildings popping up there is a trendy vibe around James Street. With so much new construction around the Valley, the revamp for older premises gains momentum.

 

GALLERY  

BEFORE IMAGE:

With the Calile Hotel bringing a sophisticated edge to the corner or James and Doggett Street, it was time for 50 James Street to embrace a new beginning. Situated in a prime position just across the road from the Calile Hotel, it’s home to boutique shopping and shared office spaces.

With its original façade adopting a more segmented style of design, the building appeared to step back and forth and looked as if it was a collection of smaller tightly connected buildings.  Looking to achieve a new sleek design that flowed from Doggett into James Street to create a larger more opulent building, the sharper lines were softened with curves.

Removing a section of the independent ground level awnings and replacing with one single curved awning connected many shops under one roof line. With the solution for the ground level in place the 1st level required a form of screening to camouflage the segmented windows and follow the new curve. With a review of many typical screening options, the clients come across the innovative properties offered by Kaynemaile Architectural Mesh.

Kaynemaile Mesh ticked all the boxes, offering a seamless piece of mesh that wrapped around from Doggett into James Street in one single piece. Light weight it was easily retrofitted to the building with the mesh only requiring perimeter fixing points, the solar benefits offered some well needed shade to the top level. The façade renovation fits superbly into the updated streetscape with the inside out view from the upper level unhindered by the mesh.

A bonus for the Up late on James Street events, has been the ability to project back on to the screen to offer the attendees an everchanging light show.

For more information

Austaron Surfaces






Get our enews

Design and development news that comes to you

Subscribe
                 


Developer Investa Melbourne CBD office project nears approval

Investa, a prominent developer, has advanced closer to securing approval for its latest office project in Melbourne's CBD. The ...

Snøhetta's Vertikal Nydalen sets a new standard with net-zero energy performance

In Oslo, Norway Snøhetta, the renowned architecture firm, has unveiled Vertikal Nydalen, a groundbreaking mixed-use building that sets ...

Stockland secures approval for 42-Storey St Leonards office tower

Stockland Development Pty Ltd has achieved a significant milestone in its development plans, securing approval from the North ...

Historic homestead ravaged by bushfires to be reborn as luxurious hotel and spa

Plans for a lavish high-end hotel and spa at a historic homestead in the Margaret River region, which ...

Foster + Partners designs 'The Star': Hollywood tower wrapped in spiralling gardens

Hollywood, Los Angeles, is poised to welcome an iconic addition to its skyline with the unveiling of revised ...

  MORE  

Stay connected to the SPEC

Join our reader network by signing up to our weekly newsletter and receive design and development news straight to your inbox





Specifier Source is brought to you by the same company that publishes Home Design, Grand Designs Australia Magazine, Kitchens & Bathrooms Quarterly Magazine, Outdoor Design Source, Build Home, CompleteHome and many more.

© 2022 Universal Media Co. All Rights Reserved. Privacy Policy. Terms of Service. The material on this site may not be reproduced, distributed, transmitted, or otherwise used, except with the prior written permission of Universal Media Co.